WARNING!
Potential hazard that could result in serious injury or
loss of life.
• Read all instructions in this manual carefully and
understand them thoroughly before using the
Air-powered Hammer/Chisel.
• Ensure the air supply is clean and has a regulated
pressure of 90 psi (6.3 bar).
• Do not use additional or excessive force on the
Air-powered Hammer/Chisel. Failure to comply
could result in serious injury or loss of life.
15
14
model no. 058-9365-2 | contact us 1-888-670-6682
3. Plug in compressor, turn it on, set the pressure
regulator to 90 PSI (6.3 bar), then attach one
end of the air hose to the compressor and the
other end ofthe air hose (1) to the tool (2).
Use plumber’s tape to avoid air leakage (Fig. C).
• Use the chisels specifically designed for this Air-
powered Hammer/Chisel. Failure to comply may
result in moderate injury or damage to equipment.
CAUTION!
Potential hazard that may result in moderate injury or
damage to equipment.
DANGER!
Potential hazard that will result in serious injury or
loss of life.
• Keep children away from the work area. Do not allow
children to handle power tools.
2. Insert the quick-change retention spring (1)
around the chisel (2) in the chuck, and tighten
the quick-change retention spring (Fig. B).
4. Press the trigger (1) to activate the chisel
(Fig. D).
1.
OPERATION
Fig. A
Fig. C
Fig. D
Fig. B
TM
Insert the required chisel (1) into the
chuck (2) (Fig. A).
