7
6
model no. 058-9365-2 | contact us 1-888-670-6682
• Do not use oxygen or any other co
mbustible or bottled gas to
power air-powered tools. Failure to observe this warning
can cause an explosion and serious personal inju
ry or
death. Use only compressed air to power
air-powered tools. Use a minimum of 25’ (7.6 m) of
hose to connect the tool to the compressor. Failure
to comply will result in serious injury or loss of life.
•
Risk of bursting.
Make sure the regulator is adjusted
so that the compressor outlet pressure is set lower
than the maximum operating pres
sure of the tool.
Before starting the compressor, pull the ring on the
safety valve to make sure the valve moves freely.
Drain water from tank after each use. Do not weld
or repair tank. Relieve all pressure in the hose
before removing or attaching accessories.
•
Risk of electric shock.
Do not expose a
compressor to rain.
Store it indoors. Disconnect the compressor from the power
source before servicing. Compressor must be grounded. Do
not use grounding adaptors.
Risk of personal injury.
Do not direct compressed air from the
air hose toward the user or other people.
Breathing risk.
Never directly inhale the air produced by the
compressor.
Risk of bursting.
Do not adjust the pressure switch or safety
valve for any reason. They have been preset at the factory for
the compressor’
s maxim
um pressure. Tampering with the
pressure switch or the safety valve may cause personalinjury
or property damage.
Risk of burns.
The pump and the manifold generate high
temperatures. In order to avoid burns or other injuries, do not
touch the pump, the manifold or the transfer tube while the
compressor is running. Allow the parts to cool down before
handling or servicing. Keep children away from the
compressor at all times.
WARNING!
Potential hazard that could result in serious injury or
loss of life.
• Do n
ot allow unskilled or untrained individuals to operate
the Air-powered Hammer/Chisel.
• A
lways ensure that the accessories are specially designed/
rated for use with the tool. Also ensure they are secured and
correctly fastened before connecting the tool to the air
supply.
• Use only li
ghtweight coil type hoses to connect the tool to
the compressor coupling.
• L
ocate the compressor in a well-ventilated area for cooling,
at a minimum of 12" (31 cm) away from the nearest wall.
• P
rotect the air hose and the power cord from damage and
puncture. Inspect them for weak or worn parts every week,
and replace them if necessary.
• A
lways wear hearing protection when using the air
compressor. Failure to do so may result in hearing loss.
• Do n
ot carry the compressor while it is running.
• Do n
ot operate the compressor if it is not in a stable position.
• Do n
ot operate the compressor on a rooftop or in an elevated
position that could allow the unit to fall or be tipped over.
• Keep children away from the work area. Do not a
llow
children to handle power tools.
• Do not use this tool in the presence of flam
mable
liquids or gases. Sparks that are created during use
may ignite gases.
• Do not point the tool toward yourself or other people
.
Keep hands, feet and all other parts of the body clear
from work area.
• Always ensure that the workpiece is firmly secured,
leaving both hands free to control the tool.
• Always ensure that the tool has stopped after use, for
safety purposes and to prevent possible damage to
the tool/user.
DANGER!
Potential hazard that will result in serious injury or
loss of life.
TM
