Maximum 058-9365-2 Instruction Manual Download Page 12

23

22

model no. 058-9372-4 |  contact us 1-888-670-6682

TM

This MAXIMUM product is guaranteed for a period of 5 years 
from the date of original retail purchase against defects in 
workmanship and materials only and is subject to the following 
components: 
a) Component A: The carrying case is guaranteed for a period of 
1-year from the date of original retail purchase against defects in 
workmanship and materials.

These warranties are subject to the following conditions and 
limitations:

Subject to the conditions and limitations described below, this product, 
if returned to us with proof of purchase within the stated warranty 
period and if covered under this warranty, will be repaired or replaced 
(with the same model, or one of equal value or specification), at the sole 

discretion of the Maximum Canada authorised repair centre (“Service 

Provider”). We will bear the cost of any repair or replacement and any 
costs of labour relating thereto.

A bill of sale verifying the purchase and purchase date must be provided;
Defects in workmanship and material to be assessed and determined by
the Service Provider;
This warranty will not apply to any product or part thereof which is worn
or broken or which has become inoperative due to abuse, misuse, 
accidental damage, neglect or lack of proper installation, operation or
maintenance  (as outlined in the applicable owner’s manual or operating 
instructions);

This warranty does not apply to normal wear and tear or to expendable 

parts or accessories (including drill bits and saw blades) that may be 
supplied with the product that by their nature have a limited life span 

and are expected to become inoperative or unusable after a reasonable 

period of use;
This warranty will not apply to routine maintenance and consumable 
items such as, but not limited to,anvils, vans, washers, bearings, plates, 
pins, ratchet yokes, ratchet pawls, chisels, springs, rubber o-rings, tune-ups
or adjustments;

This warranty excludes the following components that may accompany 

your product: 
(1) The carrying case, which is only for a period of 1-year from the date of 
     original retail purchase against defects in workmanship and materials.
(2) Accessories, including drill bits and saw blades, which do not carry a 
      warranty of any kind.
This warranty will not apply where damage is caused by repairs made or 
attempted by others (i.e. persons not authorized by the manufacturer), 
and any such unauthorized repairs or attempted repairs shall void this 
warranty in its entirety;

FURTHER, THE WARRANTIES SET OUT HEREIN ARE IN LIEU OF ALL OTHER 
WARRANTIES OR CONDITIONS, WHETHER EXPRESS, IMPLIED OR 
STATUTORY (INCLUDING SUCH AS ARISE UNDER THE SALE OF GOODS 
ACT OR THE INTERNATIONAL SALE OF GOODS ACT), ARISING OUT OF A 
COURSE OF DEALING OR USAGE OF TRADE OR OTHERWISE, INCLUDING, 
SUBJECT TO APPLICABLE LAW, ANY IMPLIED WARRANTIES OR 
CONDITIONS OF MERCHANTABILITY, MERCHANTABLE QUALITY, FITNESS 
OR ADEQUACY FOR A PARTICULAR PURPOSE OR USE, AND ALL OTHER 
SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED BY THE RETAILER 
AND MANUFACTURER.

a) 
b)

c)

d)

e)

f)

g) 

This warranty will not apply to any parts other than original parts, 

except to the extent that the retailer or manufacturer or persons 

authorized by either of them have repaired or replaced them;
This warranty will not apply to any product that was sold to the original 
purchaser as a reconditioned or refurbished product (unless otherwise 
specified in writing);
This warranty will not apply to any product or part thereof if any part 
from another manufacturer is installed therein or any repairs or 
alterations have been made or attempted by unauthorized persons;

This warranty will not apply to normal deterioration of the exterior finish, 

such as, but not limited to, scratches, dents, paint chips, or to any 
corrosion or discolouring by heat, abrasive and chemical cleaners; and
This warranty will not apply to component parts sold by and identified as 
the product of another company, which shall be covered under that 
product manufacturer’s warranty, if any; 
Any products replaced by the retailer in attempt to fulfill warranty 
obligations is subject to the original product warranty conditions and 
related time period as initiated by the original date of purchase; if 

product is purchased in Quebec, the warranty term will be extended for 

a period equal to the time during which the Quebec retailer possesses 
the product in attempt to fulfill warranty obligations; replaced product 
will not default to new product warranty conditions; and
The retailer and manufacturer’s sole obligation and the purchaser’s sole
remedy under this warranty shall be as set out herein. The warranties 
contained herein are not transferable and are given only to the purchaser. 

h)

i)

j)

k)

l)

m)

n)      

model no. 058-9365-2 |  contact us 1-888-670-6682

TM

Summary of Contents for 058-9365-2














Reviews: