USER'S MANUAL
USER'S MANUAL
When the parity setting (a=2) is specified :
-When the data length setting (a=4) is specified :
-When the flow control setting (a=3) is specified :
d1 Data length
56 8 bits (Fixed)
d1 Flow control
48 DTR / DSR (Fixed)
d1 Parity
48 No parity (Fixed)
If a is out of range, this command ignores the value which is
specified with a.
GS B
n
GS I b
Turns white/black reverse printing mode on / off.
S B n
n
n
n 255
n=0
Turns white/black reverse printing mode on or off.
- When the LSB of n is 0, white/black reverse mode is turned off.
- When the LSB of n is 1, white/black reverse mode is turned on.
ASCII G
Hex 1D 42
Decimal 29 66
0
Transmits battery status.
S I b
Transmits the battery power status of the printer
The transmitted battery status from this printer is constructed by
[Header ~ NUL] as shown in the
ASCII G
Hex 1D 49 62
Decimal 29 73 98
[Name]
[Format]
[
]
Range
[Default]
[Description]
[Name]
[Format]
[Description]
[Notes]
Transmitted data Hex Decimal Amount of data
Header 37H 55 1byte
Identifier 45H 69 1byte
Battery remaining 30h-34H 48-52 1byte
NUL 00H 0 1byte
Battery remaining amount is as indicated in the following table.
Battery remaining amount:
Hex Decimal Information
30H 48 Battery remaining amount : H level
31H 49 Battery remaining amount : M level
32H 50 Battery remaining amount :L level
33H 51 Battery remaining amount :S level
34H 52 Battery isn't installed
GS I
n
Transmits printer ID.
S I n
n
n
n 69
Transmits the printer ID specified.
- n specifies the printer information.
ASCII G
Hex 1D 49
Decimal 29 73
65
[Name]
[Format]
[
]
Range
[Description]
n Printer ID type ID
65 Firmware version Depends on firmware version
66 Manufacturer N/A
67 Printer name MOB-58
Font of Language for each country N/A