USER'S MANUAL
USER'S MANUAL
ESC 2
Select default line spacing.
ESC 2
The default line spacing is about 4.23 mm {1/6 inch}, which is
equivalent to 30 dots.
ASCII
Hex 1B 32
Decimal 27 50
[Name]
[Format]
[Description]
ESC 3 n
ESC @
ESC
D n1... nk NUL
Set line spacing .
ESC 3 n
n 255
The vertical or horizontal motion unit is approximately 0.125 mm
{1/203 inches}. This value equals one dot pitch.
Sets the current line spacing to [n x vertical motion units] inches.
The maximum settable line spacing is 31.875mm.
ASCII
Hex 1B 33 n
Decimal 27 51 n
0
Initialize printer.
ESC @
n 126
Clears the data in the print buffer and resets the printer mode to the
mode that was in effect when the power was turned on.
ASCII
Hex 1B 40
Decimal 27 64
32
Set horizontal tab positions.
ESC D n1... nk NUL
n1... nk 00
n1... Nk 0
n
255,0
n
32
n=8, 16, 24, 32, 40,....., 232, 240, 248 (for font A in a standard
character size width)
Sets horizontal tab positions.
- n specifies the number of digits from the setting position to the left
margin or the beginning of the line.
- k specifies the number of bytes set for the horizontal tab position.
ASCII
Hex 1B 44
Decimal 27 68
1
[Name]
[Format]
[
]
Range
[Description]
[Name]
[Format]
[
]
Range
[Description]
[Name]
[Format]
[
]
Range
[Default]
[Description]
ESC E n
ESC G n
ESC J n
ESC L
ESC M n
Turn emphasized mode on / off.
ESC E n
n
n
n 255
n=0
Turns emphasized mode on or off.
- When the LSB of n is 0, emphasized mode is turned off.
- When the LSB of n is 1, emphasized mode is turned on.
ASCII
Hex 1B 45
Decimal 27 69
1
Turn double-strike mode on/off.
ESC G n
n
n
n 255
n=0
Turns double-strike mode on or off.
- When the LSB of n is 0, double-strike mode is turned off.
- When the LSB of n is 1, double-strike mode is turned on.
ASCII
Hex 1B 47
Decimal 27 71
1
Print and feed paper.
ESC J n
n
n
n 255
Prints the data in the print buffer and feeds the paper
[n X vertical motion unit].
ASCII
Hex 1B 4A
Decimal 27 74
1
Select page mode
ESC L
Switches from standard mode to page mode.
ASCII
Hex 1B 4C
Decimal 27 76
Select character font/ MSR card read
ESC M n
n
n
n = 0, 1, 48, 49 , 67, 68, 69, 70, 71, 72, 73
n=0
Selects only-byte character fonts
Selects Card reader mode
ASCII
Hex 1B 4D
Decimal 27 77
[Name]
[Format]
[
]
Range
[Default]
[Description]
[Name]
[Format]
[
]
Range
[Default]
[Description]
[Name]
[Format]
[
]
Range
[Description]
[Name]
[Format]
[Description]
[Name]
[Format]
[
]
Range
[Default]
[Description]
