background image

USER'S MANUAL

USER'S MANUAL

Chapter 9  Using and recharging battery

The MOB-58 is power supplied  by rechargeable Lithium-Ion battery. 
As the battery can be easily  damaged, the usage  of battery affects  the 
battery's life span. Please use the  battery properly under  below instructions.

1. If the printer is not  used for a  long time (usually more than one  week), 
    do please fetch  out the  battery for separate storage  and better to  fully 
    recharge the battery  before fetching out  the battery.
2. Power  off the printer  to save battery  power after finished using.
3. When battery  running over, the power  indicator light would  flash for 
    alarming. The printer  can still work  for an uncertain  time, but users  should 
    recharge the battery  to ensure that  the printer work  properly.
    

Follow the below operations:
1. Plug the  recharger into an  outlet and plug  the  other terminal  to the printer.
2. While recharging, the indicator light  turns red. After  recharge, the indicator 
    light turns green.
3. Please don't  use the printer  while recharging, otherwise  the battery's life 
    span would be decreased.

Chapter 10  Specifications

Printing                                        
Paper Supply Method                
Characters Per Line                   
Character Size                            
Resolution                                   
Print Width                                   
Printing Speed                           
Cutter Type                                   
Paper Type                                    
Paper Diameter                          
Paper Width                                
Receive Buffer Size                    
Interface                                        
Barcodes                                      
                                                       

                  Battery Type                                  
                  Output                                            
                  Capacity                                        
                              Input                  
                             Output                                            
Operating Temperature                
Storage Temperature                    
MCBF Electric Life                         
Wear Life                                        
Battery

                                           

Dimensions (WxDxH)                   
                                                         
Weight                                             

MSR

Direct thermal line printing 
Easy Paper Loading
Font A:48CPL,Font B:64CPL
Font A:12x24dots,Font B:9x24Dots 
203dpi, 8dots/mm
48mm                                                           72mm 
60mm/sec 
Manual Tearing 
Thermal Paper
40mm
58mm                                                            80mm 
16k bits 
Serial, USB, Bluetooth
1D:Codebar,ITF,UPC-A,UPC-E,CODE 39,CODE93, 
      CODE128,EAN-8,EAN-13
2D:QR CODE,PDF417
Lithium-Ion
DC7.4V
1100mAh 

DC9V 1A 
0

 

~50

 

10

 

~70

 

100,000,000 pulses
Paper feed length Approximately 50 Km
1200 Cycles Rechargeable 
Auto 1/2/3 Track(Option) 
78x125 x 46 mm(No MSR)      100x121 x 46 mm(No MSR)
78 x132 x 46 mm(With MSR)  100 x128 x 46 mm(With MSR)                                                 
230g                                             280g

AC100~240V 50/60Hz 0.5A

Battery

Battery Charger

Summary of Contents for MOB-58

























Reviews: