MaxID iDLMax, Product User Manual

Page: 7 / 54

P R E F A C E
A B O U T T H I S G U I D E
Product User Guide 4
Precautions
As with any portable computer device, precaution should be taken to avoid any damage. The following precautions are recommended when using
and handling the iDLMax device.
Handling the Lithium-ion Battery
The iDLMax makes use of a sealed removable Battery-Pack that contains Lithium-ion batteries. A safety hazard and risk of explosion may possibly
occur from incorrect installation, usage or misapplication.
Do Not Disassemble, alter, modify, or insert sharp objects into the battery pack.
Do Not Expose the battery pack to strong impact, bumps or shock: Electrolyte leakage, ignition or rupture may result. If exposed to such
conditions, stop using the battery pack immediately
Do Not Use with any other products: The iDLMax removable Battery-Pack was designed for use with the iDLMax product. If used with any other
product, it may cause electrolyte leakage, generation of heat, ignition or rupture.
Do Not Use the iDLMax with any other Battery pack than the one supplied or specified: If other battery packs are used, it may result in heat
generation, ignition or rupture.
Do Not Charge the battery pack in any other way than described in this manual: if not charged as specified, electrolyte leakage, generation of
heat, ignition or rupture may result.
Do Not Throw the battery pack into a fire or Expose it to extreme or excessive heat: (for example direct sunlight for extended periods)
Generation of heat, ignition or rupture may result
Do Not Short any contacts on the battery pack: Generation of heat, ignition or rupture may result. When transporting a spare battery, it is
recommended that it be placed in a plastic bag so that its contacts are protected and would not accidently short when brought in contact with any
metal objects.
When the battery pack has become degraded, replace it with a new one: If the amount of time the iDLMax can run by using a particular battery
pack becomes dramatically shorter and repeated recharging does not restore its performance, the battery pack should be replaced with a new one.
Generation of heat, ignition or rupture may result from continued use of degraded batteries
Storage: If the battery will not be used for extended periods of time (e.g. a month or more), charge or discharge (by means of using it) the battery
pack until the remaining battery level becomes 40-50%. Store the battery pack in a cool, dry place.
Do not expose the battery pack to water or allow it to become wet
Charging: When using a battery pack for the first time, ensure that the removable external batteries are charged. The initial charging cycle for both
batteries is approximately twelve (12) hours. Subsequent charging cycles will take up to a maximum of four and a half hours.
Use only the correct means as described in this manual to charge the battery pack: The battery pack is designed to prevent overcharging of
the battery. Using incorrect means to charge the battery could result in electrolyte leakage, generation of heat, ignition or rupture.
Should the battery leak and fluid get into your eyes, do not rub your eyes: Immediately flush your eyes with clear water and see a doctor for
medical treatment as soon as possible.
The battery pack may become warm during recharging or normal use: this is completely normal.
Recharging of the battery pack will not commence if internal temperature of the battery pack is outside of the allowable range: (0-50
degrees Celsius or 32-133 degrees Fahrenheit).
In high-temperature environments, the battery pack takes longer to fully recharge and the operating time is shorter: only use the iDLMax
within the allowable temperature range.
Recycling: Please contact your product supplier or appropriate local authority for information on correct means on how to recycle this battery.
Handling the iDLMax
The iDLMax is a ruggedized mobile device and are tested against various MIL-STD and IP specifications (for details, refer to Appendix A of this
manual). These precautions will assist in optimal benefit gained from using the iDLMax. MaxID Corp. cannot be held responsible in any way for any
damages or loss resulting from the use of this unit.
Before storing the device away, be sure to wipe off any moisture.
Do not disassemble this product and Do not allow foreign matter to ender inside the product: electric shock may occur when pins or areas of
the circuit boards are touched, or damage to various extends may result.
Unplug the AC plug and remove the battery pack if Malfunction occurs: When serious product damage, foreign objects inside the product,
smoke emitted, unusual smell emitted or product becomes unusually hot, immediately turn the power off, unplug the AC plug and remove the
battery. Continuing to use the product in such conditions may result in fire or electric shock.
Use only the correctly supplied AC cord and plug and AC adaptor.
When using the AC cord, insert the AC plug completely into the AC outlet: fire due to overheating or electric shock may result if not done
Do not use a damaged plug or loose AC outlet.
Do not use the AC plug if your hands are wet: Electric shock may result
Do not connect the AC adaptor to a Power Source other than the specified or standard defined AC outlet: Doing so could damage the device
or cause fire due to overheating.
Do not damage the AC adaptor, AC cord or AC plug in any way: Damaged cord may result in fire, short circuit, or electrical shock. Do not place
the cord near hot tools, twist or pull it forcefully, place heavy objects on it, bundle it tight together, or modify the cord.
Clean dust and other debris of the AC plug regularly: accumulated dust or debris along with humidity may cause a defect to insulation, which
may result in fire or electric shock.
Unplug the AC plug holding onto the plug itself: Pulling on the cord may damage the cord, resulting in fire or electric shock.