6
Adjusting Base
The base has multiple
positions to help achieve the
correct recline angle.
•
The adjustment handle is
at the back of the base.
•
Squeeze the adjustment
handle.
•
Lift the back of base up.
•
Then release the handle so
the base foot locks into a
position.
•
The
horizontal
section of
the angle indicator will turn
completely green
when
correct. No red should be
showing.
5
Base Recline Angle Position
Load Leg
The load leg is stored under
the base.
This is an optional
feature.
The base install is equally safe
with or without the use of the
load leg.
In a crash, load legs reduce
downward rotation, limit
rebound, provide additional
stability, and energy absorption.
•
Fold the load leg out.
•
Squeeze the buttons on the
load leg and pull it down until
it meets the vehicle floor.
•
Release the buttons.
•
Lift the front of the base while
holding the load leg in place
to lock it into position.
•
It
must be
perpendicular to
the vehicle floor.
Do not use the load leg on top of vehicle
storage compartments. Review your vehicle
owner’s manual. Do not use the load leg if it
does not reach the fl oor of your vehicle. When
not in use, the load leg must be stored under
the base.
