continued on next page
5
6
Push Release Lever
Down
You
must
Push the
Release Lever Down
in order for the LATCH:
Lower Anchor belts to
tighten.
23
Push Down on Base
to Tighten LATCH:
Lower Anchor Belts
The belts will begin to
automatically retract
and tighten as you push
down.
Check Tightness
Indicators
The red will turn
completely green
when tightened correctly.
No red should be show-
ing.
24
• Pushing down on the
base more;
OR
• Reinstalling the base;
OR
• Changing to a different
seating location;
OR
• Switching to vehicle belt
installation
You can also check the tightness by:
If it moves more than 1 in. (2.5 cm), you can try:
• Holding the base
ONLY at
the belt path
with your non-
dominant hand.
• Pushing and pulling from side
to side.
• The base should not move
more than
1 in.
(2.5 cm).
