continued on next page
2
Check Base Angle
If the angle indicator is
not correct, adjust the
base.
Adjust Base
•
The adjustment handle
is at the back of the
base.
•
Squeeze the adjust-
ment handle.
•
Lift or lower the back
of the base.
•
Then release the handle so the base foot locks
into a position.
21
NOTE:
You may need to place a
tightly rolled towel(s) or foam pool
noodle(s) under the back of the base
to help get the correct angle. Check
the padding often to make sure it is
still in place.
•
The
horizontal
section
of the angle indicator
will turn
completely
green
when correct.
No red should be
showing.
22
4
Release LATCH:
Lower Anchor
Connectors from
Storage Location
• Press in red button.
Push connector into
storage location.
• Then pull it and the
belt out.
Attach Connectors to
Vehicle Anchors
Review your vehicle
owner’s manual for
LATCH: lower anchor
locations and LATCH:
lower anchor use.
3
Lift Release Lever
You
must
Lift the
Release Lever
in order
for the LATCH: Lower
Anchor belts to loosen.
