continued on next page
31
6
Push Release Lever
Down
The lap belt or the lap/
shoulder belt both go
completely under
the
belt path guides and the
Lockoff as shown.
After the base has
been installed
, if your
car has a switchable
retractor, you may also
use it to lock the belt.
32
• Tightening the belt more;
OR
• Reinstalling the base;
OR
• Changing to a different
seating location;
OR
• Switching to LATCH: Lower
Anchor belt installation
If it moves more than 1 in. (2.5 cm), you can try:
• Holding the base
ONLY at
the belt path
with your non-
dominant hand.
• Pushing and pulling from
side to side.
• The base should not move
more than
1 in.
(2.5 cm).
You can also check the tightness by:
5
Push Down on Base
While Tightening
Belt
You
must
tighten the
vehicle belt
BEFORE
closing the Lockoff.
Check Tightness
Indicators
The red will turn
completely green
when tightened
correctly.
No red
should be showing.
