Page
9
of
13
Check your installation and test the suspension cylinder. When you are happy with
everything, drip thin CA on the ends of each nut for extra security.
ASSEMBLE THE WINGS:
Install the wing centor section to the fuselage.
This part will be permenantly installed on fuselage,
and will not need to be removed when taking off
wings for transportation.
Attach servo leads and guide them out of the
wing panel, use servo safety clips to secure the
connection. Install wing strut to support top and
bottom wing panels. Use the optional Adjustable
Biplane Wing Support when you assemble wing
set. It also can be used for any biplane wing set
transportation within the its adjustable range of 10
¾” ~16 ¾”.
http://www.maxfordusa.com/adjustablebiplanewingsupport.aspx
Install alieron and flap servos to the slots on the bottom of top wing. Use the tall
