Page
10
of
13
black horns for ailerons and flaps. Th
e
short black horns are non functional, and just
for scale look. You may glue them to the bottom of top wing
as shown below.
Slide top and bottom wing rods in place, then test fit the left and right wing sets to
the fuselage.
Line up the wing locking tab with the slot on wing panel, use provided screws to lock
top and bottom wings.
INSTALL THE POWER SYSTEM:
Test fit then mount gas engine to the motor box, reference with your engine
instruction manual for safety installation. Slide motor box into fuselage, then test fit
with nose cowl. Mark the motor box position, then mount L mounts to secure the
