14
-Place a wheel on the axle. Carefully push the
wheel so the cover compresses slightly.
-Place a wheel collar on the axle, and tighten
with a .035” allen wrench. Remember to put
threadlock on the screw.
-Carefully uncompress the wheel cover. When
the cover uncompresses it will hide the wheel
collar.
-Screw the tailskid into position at the back
of the aircraft with 2 screws.
ds into the blocks
m into place.
-Shine a strong light through the top of the
bottom wing to help locate the two wingtip
skid mounting blocks. (There should also be
two small holes poked into the covering
material.)
-Insert the 2 carbon fiber ro
and glue the
©
2008 Maxford USA www.maxfordusa.com
14
