12
-Screw the 2 nylon bolts into the lo
-Raise and screw the front cabane
position. Bolt the cabane struts to the
cabane mounts.
wer wing leading
struts back into
upper wing
wing flying wire clevis to the lower
wing wires, and crimp the swag
wing and cabane strut bolts. Put a
hem.
y-
arness.
-You may add two pilot figures if you want.
edges from inside the battery compartment.
-Attach the
aft inner wing strut swivel. Do not attach it to
the wing wires!!
-Tighten the
fitting closed like you did with the elevator and
rudder control cable links.
-Tighten all
drop of thread lock on t
-Attach the aileron servo leads to the aileron
h
©
2008 Maxford USA www.maxfordusa.com
12
