MAXDATA Belinea 101555, Service Manual

Page: 24 / 52

MAXDATA Belinea 101555
_____________________________________________________________________________________________________________________
This page only visible in factory mode
R,G,B OFFSET:
Adjust current RGB cut off level
R,G,B GAIN:
Adjust current RGB Driver value.
SPREAD:
Adjust chip set internal frequency spread
effect for EMI testing.
z
Factory1 Adjustment
z
Factory2 Adjustment
This page only visible in factory mode
AUTO BURN:
Use the chip set internal pattern for hot
running monitor panel and inverter.
AUTO COLOR:
Perform Auto Balance measurement.
AUTO COLOR 1:
Perform Auto Balance measurement by
chip set internal signal. And reference
these values to initial all other color
temperature detail parameters.
COLOR UPDATE:
Force presently R,G,B offset and gain
parameters update to currently
temperature memory address.
FACTORY RESET:
Recall to factory setting and power off
immediately.
VERSION:
Display F/W version and panel vender and
DDC serial no.
/A: LG panel
/B: CPT panel
_____________________________________________________________________________________________________________________________
111503
Page 2 4
Confidential -