MAXDATA Belinea 101555, Service Manual

Page: 9 / 52

MAXDATA Belinea 101555
_____________________________________________________________________________________________________________________
3.4.3 Attached video signal cable
connector x 1
Figure 3.4
Signal cable input connector.
Shell
1 2 3 4 5
10
12
11
6
13 14 15
Pin
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Signal Name
Blue video
Green video
Red video
Vsync (VCLK)
Ground
Hsync
Ground
N/C
Blue return
Green return
Red ground
Ground
Ground
SDA (serial data)
SCL (serial clock)
3.5. ELECTRICAL SPECIFICATIONS
3.5.1 Standard conditions
Display area (HxV)
1024 x 768 Display mode
More than 30 minutes Warming up time
AC 220,50Hz Input voltage
25 +/- 5 C degrees Ambient Temperature
Max. Brightness
Max. Contrast
0.7 Vpp Video signal level
304 x 228 mm
3.5.2 POWER
3.5.2.1 Power supply
AC-DC adapter
Input voltage 100 - 240 V
Input current max. 1 Arms
Output voltage 12VDC, 350mA, 3.3V 2A
Frequency range 50 - 60 Hz
Inrush current Shall be less than the ratings of critical components
(including fuse, rectifiers and surge limiting device)
for all conditions of line in voltage.
Maximum power consumption: 40 Watts
3.5.2.2 Power Management
The Power Management System complies with TCO 99 standards.
MODE H-SYNC V-SYNC COLOR OF
POWER LED
POWER CONSUMPTION RECOVERY TIME
On Active Active Green < 40 Watts -
Off Inactive Inactive Amber < 1 Watts < 30 seconds
Remark: In case of “no signal“ Power LED must be amber.
At first power on w/o signal LED will be green + message on screen.
_____________________________________________________________________________________________________________________________
111503
Page 9
Confidential -