background image

MAXDATA                       

      

 

                                                                                  Belinea 101555 

_____________________________________________________________________________________________________________________ 

 

4. THEORY OF OPERATION 

 

This section describes the function of the LCD monitor per functional block.

 

Belinea 101555 monitor includes MB board (including audio board function inside), inverter board, adapter  
and button board. 

 

4.1 MB BOARD 

The MB board is a four-layer, single-landed design with ground and internal planes provided. DC power

 

from the power adapter enter the board through DC jack. Other connectors on the board are for inverter, 
and button  board .The VGA cable is a signal cable that contains video signal, sync signal and DDC 
signal from PC VGA adapter. 
The system board consists 3 functional areas: flat panel controller, micro-controller and power regulator. 
 

4.1.1 Flat panel controller…… gmZAN2 (U1)

 

The heart of the system board is MRT MVZ. The MVZ is a graphics processing IC for LCD monitor

.  

It provides all key IC functions required for LCD panel. On-chip functions include a high-speed  
triple-ADC, PLL, high scaling engine, and OSD controller

 

a) Clock Generation :

 

Crystal Input Clock (TCLK and XTAL). This is the input pair to an internal crystal oscillator and

 

corresponding logic. A 20 MHz crystal is recommended

 

b) Hardware Reset ( Pin 155 )

 

Hardware Reset signal is generated by micro-controller (U1, pin 36). It assert a reset signal at least 100 ms. 
 

c) Analog to Digital Converter

 

The MVZ chip has three ADC's (analog-to-digital converters), one for each color (red, green and blue) 
The analog RGB signals are connected to MVZ as described below 

 
 
 
 
 
 
 
 
 
 
 
 
 

Pin Name

 

48

Blue -

 

47

Blue +

 

54

Green -

 

53

Green +

 

60

Red -

 

59

Red +

 

Pin Number

d) Panel Power Sequencing ( VDDCTRL, INVCTRL) ( Pin20~21)

 

The MCU has two dedicated outputs VDDCTRL and INVCTRL ( Pin76 and Pin75)  to control LCD power

 

sequencing once data and control signals are stable. 

 

e) Panel interface (Pin 66~137)

 

The MVZ driver interface is highly programmable. It supports dual bus / dual port for XGA drivers. 
 
 
 
 
 

_____________________________________________________________________________________________________________________________ 

111503

                                                                                                                                                                    Page 

13

Confidential - 

Summary of Contents for Belinea 101555





















































Reviews: