MAXDATA Belinea 101555, Service Manual

Page: 21 / 52

MAXDATA Belinea 101555
_____________________________________________________________________________________________________________________
z
Auto Configuration
When user press the select/Auto key
under none OSD status will trigger
this dialog appears and perform Auto
Configuration procedure.
Mode Information
When Display timing changed this
dialog will appear about 5 seconds. And
this feature only enable when
“
Information
”
indicates On in OSD
’
s
other page of main menu.
z
No Signal
When user not support the video signal
from the cable this dialog will appear
about 20 seconds. And then enter the
Sleep mode. One special case was in
factory mode, the display time length
will become 5 seconds for testing the
power consumer.
_____________________________________________________________________________________________________________________________
111503
Page 2 1
Confidential -