11
11
Building Your Max-Trainer
3.
When fitting the tail and fin the covering needs to be removed so the 5minute epoxy can set hard
wood to wood. Slide the tail plane in to place making sure it is aligned and spaced correctly and mark the
position on the film that needs to be removed using a pen on both the top and bottom. Slide the vertical
fin in to place and mark the area of film that needs to be removed. Using a sharp knife remove the
film approx 1mm inside of the line, this gives a better finish. Be careful not to cut in to the tail or the fin
structure as this will weaken the surface.
Do not fit yet.
Summary of Contents for MAX TRAINER Balsa Pro-Built Series
Page 1: ...Instruction Manual...
