MAX POWER
LV
LV
DBR
DAR
B1
D1
A1
LB
LA
RD
VA
VB
A
B
VA
VB
A
B
R600
The hydraulic circuit should be fitted by a hydraulic technician.
The hydraulic hoses should be crimp connected, and pressure tested.
HYDRAULIC HOSES:
(as recommended for Max Power equipment)
PPD: Supply feeder hose from pump to hydraulic directional valve; High pressure (HP) 1 ,1/4’
DAR: Supply from hydraulic directional valve to the retract; HP thermo plastic hose 1 , ¼’
DBR: Supply from hydraulic directional valve to the retract; HP thermo plastic hose 1 , ¼’
RD:
Motor drain from retract directly to oil tank; LP hose minimum ½’
LV:
Synthetic 100 bar pressure Hoses ¼’
LD:
Synthetic 100 bar pressure Hoses ¼’
CONNECTIONS / FITTINGS:
(as supplied on Max Power equipment)
A1
: Male 1, 5/16’ jic 37°
B1
: Male 1 ,5/16’ jic 37°
D1
: Male ¾’ jic 37°
LA / LB / LD : Male 1/16’ jic 37°
VA / VB / VD : Male 1/16’ jic 37°
CV : Male 1/16’ jic 37°
MATERIAL
REF.
TITLE
REVISION PART NO.
Hydraulic fitings
Max Power
POWER
LD
VD
VD
LD
CV
CV
CV
CV
- 27 INSTALLATION MANUAL RETRACT R 600
