MAX POWER
Beading compound
Hold in place
DATE
DATE
POWER
PART NO.
REVISION
3RD ANGLE PROJECTION
Fiting the hull plate
Rubber block
To obtain a perfect hull plate fit follow these instructions
With thruster securely bolted down on its flange, install the hull
plate bracket on the thrusters mounting points. Be sure that the
locking point positioning blocks are in place (1).
Score the position so as to be able to re fit it in exactly the
correct place (2).
Take the finished and formed hull plate and place four piles of
beading compound on it and push the plate into place(3).
Hold the plate in place until total curing of the compound. Then
lower the thruster and remove the bracket hull plate assembly
now glued together.
Reinforce the bond between plate and bracket using
mechanical fasteners as per construction technology.
1
2
3
- 24 INSTALLATION MANUAL RETRACT R 600
