KK-642.014 Rev.No:1 01.08.12 Page | 12
***
INHIBIT***
> All
:Inhibition not active
Channel 1 :Inhibition not active
Channel 2 :Inhibition not active
Channel 3 : Inhibition Active
Channel 4 : Inhibition Active
------------------------------------------------------------
Enter
– Ok
Exit - Pre
Menu
Using
“Up (+)” and “Down (-)” buttons channel which wants to be inhibited is selected. The sign ‘>’ on the left
of the channel is moved). Then pressing enter selects the channel you want to be inhibited. (On the right
side of the channel the sign
‘<’ appears. In this position pressing ‘Down (-)’ button “Inhibited is active” text is
screened. Hence channel is inhibited. If the channel inhibited before, then selecting channel using
“Up(+)”
button changes the text
“Inhibited is active” into ““Inhibited is inactive” and channel is no longer inhibited.
10.2.2 Zeroing
When zero adjustment wants to apply channels, this function is used.
***
ZEROING***
Select the channel for zeroing
#1:Channel1
------------------------------------------------------------
Enter
–Ok
Exit
– Pre Menu
First of all the channel which want to be zeroed is selected. To do that
“Up (+)” and “Down (-)” buttons are
used and after determining the specific channel, press
“Enter” button to get into the zeroing submenu.
***
ZEROING***
#1:Channel1
Zeroing channel is inhibited!!!
When get ready press
“Enter”
0
-------------------------------------------------------------
Exit
– Pre Menu
To start zeroing, press
“Enter” once again and system performs zeroing of the related channel.
***
ZEROING***
#1:Channel1
Zeroing channel is inhibited!!!
20
Input fault
--------------------------------------------------------------
Exit
– Pre Menu
***
ZEROING***
#1:Channel1
Zeroing channel is inhibited!!!
0
Zeroing has been done
--------------------------------------------------------------
Exit
– Pre Menu
