MAVIG GD60D012, Assembly Instructions Manual, Page: 13 / 22

DBF01O04.docx (MAVIG #7111730) page 13 of 22
3.3.
O
PTION TO
F
IXATE A
C
ONNECTION
P
LATE
If following installations need to fixate a connection plate of the GD60D above the
interface plate, use the dimensions given below to calculate the thread length:
In chapter 3.4.1
(page 15)
:
 Set
140mm
as minimum value of “c”
 Install
2 additional hexagon nuts
on the 2 neighboring threaded rods, where
the connection plate needs to be fixated (red arrows below).

The additional nuts don’t need to be tightenend.
Fig. 9
In chapters 3.4.2 (page 16) and 3.4.3 (page 18) :

The value of “a” has to be 155mm .

Install 2 additional hexagon nuts on the 2 neighboring threaded rods, where
the connection plate needs to be fixated (red arrows below) between the middle
and interface plate.
 The additional nuts don’t need to be tightenend.
Fig. 10