![Maverick MK2 Spot User Manual Download Page 30](http://html1.mh-extra.com/html/maverick/mk2-spot/mk2-spot_user-manual_1742482030.webp)
Operation
Maverick MK2 Spot User Manual Rev. 4
-27-
Gobo
Replacement
The gobos in both gobo wheels 1and 2 are removable from their gobo holders. This operation is
quite simple, although it requires the technician to be careful and to follow the recommended
procedure.
•
Make sure to disconnect the product’s power cord before replacing a gobo
•
Always replace a gobo with a gobo of the same dimensions.
•
Use only glass gobos when using custom gobos in gobo wheel 2.
•
When inserting a glass gobo, always make sure that the shiny side of the gobo
(glass base) faces the lamp. This provides a layer of protection against the high
temperature from the lamp.
Procedure
1. Turn the product off and disconnect it from the power outlet.
2. Open the head cover by loosening the 4 Phillips-head ¼-turn screws on the sides of the top
cover.
3. Separate the gobo holder away from the gobo wheel by pushing it toward the front of the
moving head (direction 1 in the diagram). Be careful not to push the gobo out of the gobo
holder.
4. Extract the gobo holder by pulling it outward (direction 2 in the diagram).
5. On a flat surface, remove the expansion ring that holds the gobo in place and remove the
gobo from the gobo holder.
6. Insert a new gobo and hold it in place with the expansion ring.
7. Slide the tip of the gobo holder under the pressure plate near the center of the gobo wheel.
8. Push the gobo holder inwards. DO NOT force the gobo holder into the gobo wheel slot. If
correctly installed, the gobo holder should easily slide itself into the gobo wheel slot.
Gobo Replacement
Diagrams
Gobo Holder
Gobo Holder
Gobo
Retaining Spring
Gobo Wheel 1
Gobo Wheel 2:
Gobo
Wheel 2 can be accessed
from below Gobo Wheel 1.
Remove the lower access
panel.
Gobo Wheel 1
Summary of Contents for MK2 Spot
Page 1: ...User Manual...