Operation
-16-
Maverick MK2 Spot User Manual Rev. 4
Lock the Screen
To lock the touchscreen control panel and menu buttons, do the following:
Navigate to the
Settings
menu.
1.
Use
<UP>
or
<DOWN>
to select
Lock Screen
, or touch the display where it says
Lock Screen
.
2.
If using the buttons instead of the touchscreen, press
<ENTER>
.
3.
Use
<UP>
,
<DOWN>
,
<LEFT>
, or
<RIGHT>
to select
NO
(display will respond to touch or
4.
buttons) or
YES
(display will not respond to touch or buttons), or touch the display where it says
the desired option.
Press
<ENTER>
.
5.
To unlock the touchscreen and menu buttons, do the following:
Touch the display touchscreen anywhere or push any menu button.
1.
Enter the passcode (
0920
) using the touchscreen or buttons.
2.
Swap Pan and Tilt
To switch the pan and tilt functions so that what normally controls the pan controls the tilt and what
normally controls the tilt controls the pan, follow the instructions below:
Navigate to the
Settings
menu.
1.
Use
<UP>
or
<DOWN>
to select
Swap XY
, or touch the display where it says
Swap XY
.
2.
If using the buttons instead of the touchscreen, press
<ENTER>
.
3.
Use
<UP>
,
<DOWN>
,
<LEFT>
, or
<RIGHT>
to select
NO
(normal pan and tilt) or
YES
(pan
4.
controls tilt, tilt controls pan), or touch the display where it says the desired option.
Press
<ENTER>
.
5.
Pan/Tilt Speed
To set the maximum speed of the pan and tilt:
Navigate to the
Settings
menu.
1.
Use
<UP>
or
<DOWN>
to select
XY Mode
, or touch the display where it says
XY Mode
.
2.
If using the buttons instead of the touchscreen, press
<ENTER>
.
3.
Use
<UP>
,
<DOWN>
,
<LEFT>
, or
<RIGHT>
to select
Slow
or
Fast
, or touch the display where
4.
it says the desired option.
Press
<ENTER>
.
5.
WDMX Reset
To reset the WDMX connection from the Maverick MK2 Spot, do the following:
Navigate to the
Settings
menu.
1.
Use
<UP>
or
<DOWN>
to select
WDMX Reset
, or touch the display where it says
WDMX
2.
Reset
.
If using the buttons instead of the touchscreen, press
<ENTER>
.
3.
Use
<UP>
,
<DOWN>
,
<LEFT>
, or
<RIGHT>
to select
NO
(do not reset connection) or
YES
4.
(reset the connection), or touch the display where it says the desired option.
Press
<ENTER>
.
5.
Backlight Timer
To set the amount of time after inactivity before the display backlight turns off:
Navigate to the
Settings
menu.
1.
Use
<UP>
or
<DOWN>
to select
Backlight Timer
, or touch the display where it says
Backlight
2.
Timer
.
If using the buttons instead of the touchscreen, press
<ENTER>
.
3.
Use
<UP>
,
<DOWN>
,
<LEFT>
, or
<RIGHT>
to select
30S
(after 30 seconds of inactivity),
1M
4.
(after 1 minute of inactivity),
5M
(after 5 minutes of inactivity), or
30M
(after 30 minutes of
inactivity), or touch the display where it says the desired option.
Press
<ENTER>
.
5.
Loss of Data
In case of an input signal being lost in any way, the Maverick MK2 Spot will respond in one of two
ways. The product will either hold the last signal received, or black out all LED output.
To set which way the product responds, follow the instructions below:
Navigate to the
Settings
menu.
1.
Use
<UP>
or
<DOWN>
to select
Loss of Data
, or touch the display where it says
Loss of Data
.
2.
If using the buttons instead of the touchscreen, press
<ENTER>
.
3.
Use
<UP>
,
<DOWN>
,
<LEFT>
, or
<RIGHT>
to select
Hold
(hold last signal received) or
Close
4.
(black out all LED output), or touch the display where it says the desired option.
Press
<ENTER>
.
5.
Summary of Contents for MK2 Spot
Page 1: ...User Manual...
