Mattel Vidster, Manual

Page: 5 / 13

Installing SD Memory Card (Optional)
Your Vidster™ comes complete with 32MB of memory for saving
pictures or video. If you want more memory, you’ll need to add an SD or
MMC Memory Card (sold separately) with a memory size greater than
32MB. This external memory takes priority over any internal memory.
Turn –off your Vidster before installing a memory card.
To insert an SD Memory Card, (1) locate and
open the memory door marked with the icon
on the bottom of the Vidster™.
(2) Make sure the SD Memory Card is
properly oriented. (3) Then push the card
into the slot until it fits snugly inside.
(4) The memory door may then be closed.
The Vidster™ will automatically recognize
when the SD Memory Card has been
properly installed.
Note: You should never remove the Memory Card while the camera is in
operation.
Installing Microphone (Optional)
The Vidster™ system has its own
internal microphone but it can
also be used with an external
microphone (not included). To use
an external mic, simply insert the
microphone’s connector into the
Microphone Input Jack found in the
front of the Vidster™. The Vidster™
will automatically start using the
external microphone.
USING YOUR VIDSTER
Camera Controls
To turn the camera on, find the
Power ON/OFF switch on the
side of the Vidster™. Push the
switch to the ON position.
There may be a slight delay before
the screen comes to life.
6 7
Speaker
Power
On/Off
A/V Out
Mini-USB
Port
Imager
Microphone
Jack
Video
LED
Internal
Microphone