Output setting
1. Press the
MENU/ZOOM
key twice to show the main menu.
2. Select [I/O Setup], then press the
ENT
key.
3. Select [Data 2], [Data 3] or [NMEA0183 Version] depending on the equipment
connected.
4. Press the
ENT
key. One of the following screens appears depending on the item
selected at step 3.
5. Press or to select the option.
REM1, 2: Output data to radar, echo sounder.
AP: Output data to an autopilot.
GPS: Output GPS data (used for the service)
2.0, 3.0: select the NMEA version of external equipment. If you are unsure of the
version number, try both and select the one which successfully outputs data.
6. Press the
ENT
key.
7. Press the
MENU/ZOOM
key twice to close the menu.
10-5
Summary of Contents for HP-33A
