Matsutec HP-33A, Operator'S Manual

Page: 76 / 98

Display 1, Display 2
You can select items to show on the User display 1 (display [6]) and 2 ([7]), from
among digital data, speedometer and COG (see page 1-7). When choosing [Off] for
Display 2, for example, the display [7] is not shown.
For [Digital], you can display one to four items of digital navigation data on the user
display.
1. Press
X
and ENT key in order to show the following window.
2. Select the screen division, which is the number of data to display, and press the
ENT key.
The display now looks something like the one shown below, showing data choices
and screen division selected.
3. Select [A], [B], [C] or [D], and press the ENT key.
*: Depending on the selection at step 2.
A
A
B
A
B C
ODO: Odometer distance
Trip: Trip distance
Time: Time
Date: Date
POSN: Position
Volts: Power voltage
SOG: Speed over ground
COG: Course over ground
RNG: Range
BRG: Bearing XTE: Cross-track error
TTG: Time to go
(to destination)
ETA: Estimated time to
arrival (to destination)
WPT: Range and bearing
to waypoint
None: No display
*
8-8