Matsushita Electric EP1015-U1, Service Manual

Page: 22 / 52

10.5. Removing and mounting the up/down shaft bolt
*1. To remove the up/down shaft bolt, the box driver (
Ø
13 mm) must be used. To install, the
torque wrench with
Ø
13 mm must be used.
*2. The torque wrench with
Ø
13 mm socket and the box driver (
Ø
13 mm) are available as parts.
10.5.1. Removing
The pinion A and pinion B of massager block (left, right) are secured with the up/down shaft
bolts.
Remove them with the box driver (
Ø
13 mm).
(It is possible to use the Phillips head screwdriver. But it may deform the screw head. Therefore,
it is necessary to use the box driver.)
22