Matsushita Electric EP1015-U1, Service Manual

Page: 17 / 52

belt.
3. Remove the motor fitting set screw A to D, and remove the motor
and tapping belt.
10.2. Removing the tapping shaft assembly
1. Cut all the insulated ties bundling each sensor and lead wires
with the aid of a nipper, and remove the lead wires bundled to the
wire saddles (medium, large).
2. Remove all the connectors to the main circuit board.
3. Remove the massage belt, up/down belt and intensity adjustment
belt.
4. Remove the motor fitting set screws A to D, and remove the motor
and tapping belt.
5. Remove the shield panel (fitted to the circuit) set screw E to J,
and remove the shield panel and eccentric shaft spring.
6. Remove the K type stop ring by using flat head driver.
7. Remove the screw K to M and remove the intensity adjustment
block.
8. Remove the Pro tektite cover for eccentric link set screws N with
a spanner, and remove the Pro tektite cover for eccentric link and
17