Matsushita Electric EP1015-U1, Service Manual

Page: 13 / 52

3. Pull the chair down backward and cut insulated ties and remove the plastic clip.
9.2. Removing the massager
1. Remove the two installation screws from the massager cover, and
take off the cover and remove the Cover clip.
*Cover clip is available to remove only after taking off the cover.
2. Remove two snap pins connecting Ottoman Power Lift Unit and
Connecting Linkage to Back frame, and push down the seatback
to the front part for easy repaire.
*Inspection and repair are done after placing the chair as
explained in 1. and 2. above.
3. Remove the rail piece set screws , 3 pieces (left and right) shown
in Figure, and remove the rail pieces A and B.
4. When the massager moves up and down (normally), move it down
to the lowest position by setting the controller manual operation
up/down button to "DOWN", and then turn clockwise the up/down
13