GB
11
8. Secure both guards firmly by aligning the guard collar
correctly and tightening the
Screw
and
Nut
.
7. Open the
Clips
on the
Front Guard
and fit the
Front
Guard
onto the
Rear Guard
(aligning the screw holes)
and close the
Clips
.
2. Insert two AAA size batteries (not included). Make sure to
match the (+) and ( - ) ends of the batteries with the (+)
and ( - ) ends indicated in the battery compartment.
3. Close the battery compartment cover.
Installing Batteries in the Remote Control
1. Slide to open the battery compartment cover of the
remote control.
Handling the Batteries
• Improper or incorrect use of batteries may cause corrosion or battery leakage, which
could cause fire, personal injury or damage to property.
• Only use the battery type indicated in this manual.
• When the batteries are exhausted, the remote control will not function. Replace both
batteries at the same time with new ones.
• Do not install new batteries with used ones and do not mix different types of batteries.
• Do not dispose of used batteries as domestic waste. Dispose of them in accordance with
local regulations.
Handling the Remote Control
• Do not drop or cause impact to the remote control.
• Do not spill water or any liquid on the remote control.
• Do not place the remote control on a wet object.
• Do not place the remote control under direct sunlight or near sources of excessive heat.
• Remove the battery from the remote control when not in use for a long period of time,
as it could cause corrosion or battery leakage and may result in physical injury and/or
property damage including fire.
MSF13SSRE_IB_7L_130201_Annie.indb 11
13年2月1日 上午11:31