GB
10
6. Install the
Fan Blade
onto the shaft and tighten the
Blade Retaining Screw
.
3. Attach the
Base
to the
Stand
with the 4
Screws
,
Washers
and
Nuts
. Slide the
Base Cover
down to rest
on the
Base
.
4. Fit the
Motor Unit
to the
Extension Tube
and tighten
with the
Screw
. The screw must be fully tightened
before the fan can be operated. Unscrew and remove
the 4
Screws
and
Washers
from the
Motor Unit
.
5. Fit the
Rear Guard
properly (with the Handle on top)
and tighten the 4
Screws
and
Washers
securely.
Blade
Retaining
Screw
Test
Fan Blade
by rotating manually. Make
sure the
Fan Blade
turns smoothly and
securely with the shaft.
The
Fan Blade
is extremely sharp.
MSF13SSRE_IB_7L_130201_Annie.indb 10
13年2月1日 上午11:31