GB-8
INSTRUC
TION
M
ANU
AL
START/PAUSE.BUTTON
Used to start a selected programme or pause during operation.
It is required for the programme control to be turned to 0 (off) position before
selecting the programme or changing a continuing programmeme.
FUNCTION.INDICATOR.LIGHTS
When the Start/Pause button or any function button is pressed, the
corresponding light turns on. The light turns off when the function button or
Start/Pause button is re-pressed, or when the process or selected function is
completed.
The function indicator lights are also used in failure detection system mentioned in section 9.
FUNCTION.BUTTONS
Rinse hold
This function is recommended to be used when the clothes cannot be taken
immediately after the end of the programmeme. This will prevent occurrence
of wrinkles. When this button is pressed, the last rinsing water is not drained.
1
2
3
4
8
7
6
5
1
Detergent drawer
2
Start/pause light
3
Function indicator lights
4
Programme ready light
5
Programme control
6
Start/pause button
7
Function buttons
8
Programme end light
SECTION 3: CONTROL PANEL
A3.(.4.buttons,.spin.speed.selector.)
M100WM10E_20100209_without PN.indd 8
