GB-12
INSTRUC
TION
M
ANU
AL
Programme ending
• Your machine will automatically stop when the programme you have selected ends.
• The programme end light will illuminate.
• Turn the programme control to 0 (off) position.
• The door will unlock approximately two minutes after the programme ends. You can
open the door by pulling the handle of the door towards yourself and take out your
clothes.
• After you unload your clothes leave the door open to dry the interior of your machine.
If the power is interrupted at any stage of the washing programme,
your machine will continue the programme from the point where it was
interrupted. This is not harmful for your machine.
Child lock
Child lock is used in order to protect the washing cycle from the effects of unwanted button
activations during the cycle. Child lock is activated by pressing the first and third buttons on
the control panel, at the same time, for more than 3 seconds. When child lock is activated,
LEDs on the function buttons blink to indicate that child lock is active. In order to deactivate
child lock, the same buttons (1st and 3rd) should be pressed again for more than 3 seconds.
Start/Pause button will flash to confirm the deactivation of child lock.
Your machine will deactivate the spin speed selector (valid for A3 models) and
function buttons when the child lock is activated.
M100WM10E_20100209_without PN.indd 12
