!
21
Wake On LAN
If you have installed a network adapter card, connect the adapter to
the wake on LAN connector WOL1. You can then use the setup
utility to program your computer to resume from a power saving
mode whenever there is traffic through the network.
Wake On Modem
If you have installed a fax/modem card, connect the fax/modem to
the wake on modem connector WOM1. You can then use the setup
utility to program your computer to resume from a power saving
mode whenever there is an incoming call to the fax/modem.
SB-Link
If you have installed a PCI Sound Blaster audio card, connect the
card to the SB-Link connector SIDEBAND1. The SB-Link
connector solves some problems that can occur if you try to play
some DOS real mode games using a PCI Sound Blaster card.
Sideband1
WOM1
WOL1
