!
11
2.
The Slot-1 is installed with a cartridge holder. The upright
struts of the cartridge holder are folded down for shipping. Pull
the struts upwards so that they are in the upright position.
3.
Insert the processor cartridge into the cartridge holder. Follow
the instructions given with your processor cartridge. The edge
connector on the cartridge has a notch so that it only fits into
the Slot-1 in the correct way.
4.
Locate the cooling fan power supply CPUFAN1. Connect the
cable from the processor cartridge cooling fan to FAN1.
5.
On this mainboard, you can configure the processor by
entering the correct settings in the BIOS setup utility.
Installing a Socket-370 Processor
The Celeron processor installs into the ZIF (Zero Insertion Force)
Socket-370 on the mainboard.
1.
Locate the Socket-370 and CPUFAN1. Pull the locking lever
out from the socket and swing it to the upright position.
Pin-1 Corner
CPUFAN1
Socket-370
