!
15
Install the Mainboard
Install the mainboard into the system chassis. This mainboard uses
the ATX format with a twin-tier of I/O ports. Ensure that your case
has an I/O template that can be used by this mainboard.
Install the mainboard into the unit case. Follow the instructions
provided by the case manufacturer using the screws and mounting
points provided in the chassis.
Connect the power cable from the power supply unit to the power
connector ATX1 on the mainboard. If the system chassis is
installed with a cooling fan, connect the cable from the cooling fan
to the chassis fan power connector on the mainboard CASEFAN1.
Connect the case switches and indicator LEDs to the bank of
switch and LED connectors PANEL and J2 for dual color LED.
See the illustration below for a guide to the pin functions of the
PANEL connector.
HDD LED 20-21
Speaker 15-16-17-18
Reset SW 12-13
Power SW 22-23
Power LED 1-2-3
Green LED 7-8-9
Sleep SW 4-5
23
1
Keylock 10-11
ATX1
CASEFAN1
Panel
1
23
J2
