Matrox Solios eV-CL, Installation And Hardware Reference

Page: 104 / 120

104 Appendix B: Technical information
Internal 44-pin auxiliary I/O connector (left) and 10-pin auxiliary
I/O connector (right)
The internal 44-pin auxiliary I/O connector (left) and the internal 10-pin auxiliary
I/O connector (right) on the Matrox Solios eV-CLBL and Matrox Solios eV-CLFL
board are 0.1" spacing, 44-pin and 10-pin male connectors, respectively. You can
use the connectors to transmit/receive auxiliary signals for the two acquisition
paths. The connectors are located close to the top edge of the board, making the
auxiliary signals accessible from inside the computer enclosure.
The pinout for internal 44-pin auxiliary I/O connector is as follows. Refer to the
description of external auxiliary I/O connector 1 to establish if an auxiliary signal
is specific to an independent acquisition path and the type of signals that can be
routed onto it.
1
2
2 44
10
43
1
9