Matrox Solios eV-CL, Installation And Hardware Reference

Page: 20 / 120

20 Chapter 1: Introduction
Available separately
You might have also ordered one or more of the following:
• MIL, which includes Matrox Inspector
*
, or MIL-Lite. Matrox Intellicam is
included with each of the aforementioned software packages.
• SOLEVAACC01PAK* accessory kit. This kit is only for use with Matrox Solios
eV-CLB and eV-CLF; it is not for use with Matrox Solios eV-CLBL and eV-CLFL.
The accessory kit has an alternative cable adapter bracket to access the signals of
the internal auxiliary I/O connectors from outside the computer enclosure. This
bracket has a DB-9 connector instead of a DBHD-15 auxiliary I/O connector.
The DB-9 connector has the same pinout as auxiliary I/O connector 1 (DB-9) on
the adapter board of the original Matrox Solios eCL/XCL board. Note however,
when using the DB-9 connector, some DBHD-15 signals are not available.
❖
If needed, you can purchase a Camera Link or PoCL-compliant Camera Link
cable (HDR or SDR) from the video source manufacturer, Components Express
inc., 3M Interconnect Solutions for Factory Automation, Intercon 1, or other
third parties.
Handling components
The electronic circuits in your computer and the circuits on Matrox Solios
eCL/XCL are sensitive to static electricity and surges. Improper handling can
seriously damage the circuits. Be sure to drain static electricity from your body by
touching a metal fixture (or ground) before you touch any electronic component.
In addition, do not let your clothing come in contact with the circuit boards or
components.
Warning
Before you add or remove devices from your computer, always turn off the power
to your computer and all peripherals.
*. As of MIL 9.0.