Matrox Rapixo CL Pro, Installation And Hardware Reference, Page: 85 / 96

LEDs on Matrox Rapixo CL Pro 85
The table below outlines the possible colors for each LED, and their definitions.
LED type LED color and state Description
3. Firmware
configuration Off The board is configured with the recommended user’s firmware.
Red The board is configured with the golden firmware (a fall-back
configuration).
4. FPGA
configuration Green The FPGA is configured.
Red The FPGA is not configured.
5. Power Off/Red One or more of the on-board voltage regulators did not start.
If your computer is on and this LED state occurs, there is an issue
with the voltage regulators on your Matrox Rapixo CL Pro. Contact
Matrox technical support.
Green All of the on-board voltage regulators are working properly.
6. PCIe slot Off The type of slot cannot be established. The PCIe link is down.
Red, solid Slot is PCIe Gen 1, x8
Red, blinking Slot is PCIe Gen 1, x1, x2, or x4
Orange, solid Slot is PCIe Gen 2, x8
Orange, blinking Slot is PCIe Gen 2, x1, x2, or x4
Green, solid Slot is PCIe Gen 3, x8
Green, blinking Slot is PCIe Gen 3, x1, x2, or x4