Matrox Rapixo CL Pro, Installation And Hardware Reference, Page: 84 / 96

84 Appendix B: Technical information
LEDs on Matrox Rapixo CL Pro
Matrox Rapixo CL Pro has a series of LEDs to display the status of the PoCL
connections, the on-board power, the board configuration, the PCIe (Host) slot,
and the firmware configuration.
PoCL LEDs
The Matrox Rapixo CL Pro main board has two PoCL LEDs. In addition,
Matrox Rapixo CL Pro DF and QB have 2 PoCL LEDs on the Matrox Rapixo CL
Pro expansion module. Each LED indicates the status of the PoCL device attached
to that connector.
Board status LEDs
Matrox Rapixo CL Pro main board has four additional status LEDs to indicate
the status of each of the following: the firmware configuration, the FPGA
configuration, the power, and PCIe (Host) slot.
LED color and state Description
Off Matrox Rapixo CL Pro is not providing power to the camera.
Red, solid Matrox Rapixo CL Pro is sensing for a PoCL-compliant device.
Green, solid Matrox Rapixo CL Pro is providing power to the camera.
LEDs
1 2 3 4 5 6
1. Po connector 0 CL
2. Po connector 1 CL
3. Firmware configuration
4.
configuration FPGA
5 . Power
6. e (Host) slot PCI
7 . Po connector 2 CL
8. Po connector 3 CL
7 8
Expansion module Matrox Ra baseboard pixo CL Pro