Matrox Radient eCL-DF, Installation And Hardware Reference, Page: 85 / 96

Connectors on Matrox Radient eCL boards 85
The pinout for auxiliary I/O connector D is as follows for Matrox Radient
eCL-DF.
To build your own cable, you can purchase the following parts:
These parts can be purchased from third parties such as Digi-Key Corporation
(www.digikey.com).
Pin Hardware signal
name
MIL constant
for auxiliary
signal *
Digitizer
device
number for
auxiliary
signal
Description
1 RESERVED Reserved. Do not connect.
2 RESERVED Reserved. Do not connect.
3 TTL_AUX_IO_30 M_AUX_IO3 M_DEV1 TTL auxiliary signal (input/output), for acquisition path 1, which
supports: trigger input (trigger controller 3 on acq path 1), user input, or
user output (M_USER_BIT5 on M_DEV1).
4+,5- LVDS_AUX_IN26 M_AUX_IO4 M_DEV1 LVDS auxiliary signal (input), for acquisition path 1, which supports:
trigger input (trigger controller 2 on acq path 1) or user input.
6+,8- LVDS_AUX_IN27 M_AUX_IO5 M_DEV1 LVDS auxiliary signal (input), for acquisition path 1, which supports:
trigger input (trigger controller 3 on acq path 1) or user input.
7 GND N/A N/A Ground.
10 GND N/A N/A Ground.
12+,11- OPTO_AUX_IN25 M_AUX_IO1 M_DEV1 Opto-isolated auxiliary signal (input), for acquisition path 1, which
supports: trigger input (trigger controller 3 on acq path 1) or user input.
13 RESERVED Reserved. Do not connect.
14 RESERVED Reserved. Do not connect.
15+,9- OPTO_AUX_IN24 M_AUX_IO0 M_DEV1 Opto-isolated auxiliary signal (input), for acquisition path 1, which
supports: trigger input (trigger controller 2 on acq path 1) or user input.
*. These MIL constants represent the signals as of MIL 10. The signals that were previously represented by M_HARDWARE_PORTn became rep-
resented by M_AUX_IOn (where the value of n remained the same between the constants). For a complete list of changes between previous MIL
versions and MIL 10, see
MILRadientCameraLinkIOConversionTable
within
MIL Release Notes
.
Mating information
Manufacturer: NorComp, Inc.
Connector: 180-015-203L001
Backshell: 970-015-010-011