Matrox Radient eCL-DF Installation And Hardware Reference Download Page 72

Page: 72 / 96

72 Appendix B: Technical information

Dimensions and environmental

specifications

The following dimensions and environmental specifications apply to both Matrox
Radient eCL-DB/QB and eCL-SF/DF:

• Dimensions of Matrox Radient eCL-DB and eCL-SF:

16.76 L x 11.12 H x 1.871 W cm (6.6" x 4.376" x 0.737") from bottom edge of
goldfinger to top edge of board.

• Dimensions of Matrox Radient eCL-QB and eCL-DF:

16.76 L x 11.12 H x 3.903 W cm (6.6" x 4.376" x 1.537") from bottom edge of
goldfinger to top edge of board.

• Ventilation: 200 LFM between boards.

• Minimum/maximum ambient operating temperature: 0°C to55°C

(32°F to 131°F).

• Minimum/maximum storage temperature: -40°C to 75°C (-40°F to 167°F).

• Operating relative humidity: up to 95% relative humidity (non-condensing).

• Storage humidity: up to 95% relative humidity (non-condensing).

*. Up to RAD2G|DF|QB|200432* configuration. Maximum temperature might

decrease for larger Processing FPGAs.

Summary of Contents for Radient eCL-DF

































































































Search results

Summary of Contents for Radient eCL-DF

Reviews:

Matrox Radient eCL-DF, Installation And Hardware Reference, Page: 72 / 96

Search results

Summary of Contents for Radient eCL-DF

Reviews: