Matrox Radient eCL-DF, Installation And Hardware Reference, Page: 81 / 96

Connectors on Matrox Radient eCL boards 81
The pinout for auxiliary I/O connector D is as follows for Matrox Radient
eCL-QB.
Pin Hardware signal
name
MIL constant
for auxiliary
signal *
Digitizer
device
number for
auxiliary
signal
Description
1 TTL_AUX_IO_28 M_AUX_IO8 M_DEV3 TTL auxiliary signal (input/output) for acquisition path 3, which
supports: user input, user output (M_USER_BIT2 on M_DEV3), or
trigger input (trigger controller 0 on acq path 3).
2 TTL_AUX_IO_29 M_AUX_IO9 M_DEV3 TTL auxiliary signal (input/output) for acquisition path 3, which
supports: timer output (M_TIMER1 on M_DEV3), trigger input (trigger
controller 1 on acq path 3), user input, or user output (M_USER_BIT3
on M_DEV3).
3 TTL_AUX_IO_30 M_AUX_IO3 M_DEV2/
M_DEV3
TTL auxiliary signal (input/output), shared between acquisition paths 2
and 3 for trigger input (trigger controller 3 on acq path 2; 3 on acq path
3), user input, user output (M_USER_BIT5 on M_DEV2/M_DEV3), and
dedicated to acquisition path 3 for timer output (M_TIMER2 on
M_DEV3).
4+,5- LVDS_AUX_IN26 M_AUX_IO4 M_DEV2/
M_DEV3
LVDS auxiliary signal (input), shared between acquisition paths 2 and 3
for trigger input (trigger controller 0 or 2 on acq path 3; 2 on acq path 2)
or user input, and dedicated to acquisition path 3 for quadrature input
bit 0.
6+,8- LVDS_AUX_IN27 M_AUX_IO5 M_DEV2/
M_DEV3 LVDS auxiliary signal (input), shared between acquisition paths 2 and 3
for trigger input (trigger controller 1 or 3 on acq path 3; 3 on acq path 2)
or user input, and dedicated to acquisition path 3 for timer-clock input or
quadrature input bit 1.
7 GND N/A N/A Ground.
10 GND N/A N/A Ground.
12+,11- OPTO_AUX_IN25 M_AUX_IO1 M_DEV2/
M_DEV3
Opto-isolated auxiliary signal (input), shared between acquisition paths
2 and 3 for trigger input (trigger controller 1 or 3 on acq path 3; 3 on acq
path 2) or user input.
13+,14- LVDS_AUX_OUT31 M_AUX_IO12 M_DEV3 LVDS auxiliary signal (output) for acquisition path 3, which supports:
timer output (M_TIMER1/M_TIMER2 on M_DEV3) or user output
(M_USER_BIT0 on M_DEV3).
15+,9- OPTO_AUX_IN24 M_AUX_IO0 M_DEV2/
M_DEV3
Opto-isolated auxiliary signal (input), shared between acquisition paths
2 and 3 for trigger input (trigger controller 0 or 2 on acq path 3; 2 on acq
path 2) or user input.
*. These MIL constants represent the signals as of MIL 10. The signals that were previously represented by M_HARDWARE_PORTn became rep-
resented by M_AUX_IOn (where the value of n remained the same between the constants). For a complete list of changes between previous MIL
versions and MIL 10, see
MILRadientCameraLinkIOConversionTable
within
MIL Release Notes
.