Matrox QuadHead2Go Series – User Guide
27
Button
Function
1
(Source selection)
Select your input source. The following are possible input sources:
Video input
Logo
Nature background
Bezel adjustment grid
Red
Green
Blue
Gray gradient
2
(Layout configuration)
Select your layout. The selected layout is highlighted in the list. The
available layouts depend on your firmware package and can be
modified through Matrox PowerWall or the QuadHead2Go REST
API.
3
(Device information)
Shows the device information such as:
Output ID (1, 2, 3, or 4).
Model number.
IP address.
MAC address.
If IP addressing is dynamic (DHCP) or static.
Active layout.
Input mode.
Output mode.
If bezel management is enabled.
If HDCP is enabled.
If there is an input mismatch between the configuration and the
actual signal.
If there is an output mismatch between the configuration and the
actual display mode.
Serial number.
Firmware version.
FPGA version.
