16
Matrox QuadHead2Go Series – User Guide
Description of connectors
Step-by-step connection setup
This section guides you through the step-by-step connection setup of your QuadHead2Go unit.
1
Connect your DisplayPort source
Connect your DisplayPort source to the
DisplayPort IN
connector on your
QuadHead2Go unit.
Connector
Description
5V DC power
Connect the 5V DC power supply included with your product to this
connector. While the 5V DC power supply is connected to the device
and electrical socket, the power LED (
) is active (not black).
For more information on LEDs,
see “Description of status LEDs”, page
DisplayPort IN
Connect your DisplayPort cable to your Matrox unit. Connect the other
end of the cable to your audio/video source.
HDMI OUT
Connect a digital monitor to this connector.
Note:
To connect to this connector, you need a shielded HDMI cable. We
recommend you use a certified high-speed HDMI cable.
LAN
Connect a network cable to this connector.
Note:
To connect your monitors, the overmold (or boot) of the HDMI connectors must
respect the maximum width (0.823 inches/20.9 mm) and thickness (0.452 inches/11.5
mm) stated in the HDMI specifications.
