12
Matrox Graphics Card – User Guide
3
Make sure
Matrox System Utilities
are installed on your computer. (These can be
installed from your Matrox CD-ROM.)
4
Restart your computer in DOS mode, then type:
cd c:\matrox\util
[Enter]
upbiosdos
[Enter]
5
Turn off your computer, remove the other graphics card, then plug your monitor into
your Matrox graphics card.
6
Restart your computer.
Problem
Wrong color balance, screen image off-center, or no picture at all
1
Cause
Your monitor video controls may be improperly set.
1
Solution
Adjust your monitor controls (brightness, contrast and so on). For more information, see
your monitor manual.
2
Cause
Your monitor may not be properly connected.
1
Solution
Make sure your monitor is connected to the correct connector on your Matrox graphics card
(
see “Connect the monitor”, page 3
).
2
Solution
Make sure the monitor power cable is firmly in place.
3
Solution
Make sure the 15-pin connector to your Matrox graphics card is
firmly in place.
Note:
Make sure your computer uses the other graphics card to control your primary
display. Your primary display is the one that first displays information when your
computer restarts. For more information,
see “Using multiple displays…”, page 16
,
solutions
2
and
3
.
15-pin connector
