Matrix SIMADO GFXD1111S, System Manual

Page: 55 / 194

Matrix SIMADO GFXD1111S V3 System Manual 49
Fax Services
The GSM Fax and Data Service allow GSM users to send and receive fax over the GSM network. Matrix SIMADO
GFXD1111S supports sending and receiving of Fax from its Mobile port. For this application, SIMADO GFXD1111S
should be configured in SMS + In Fax + Data mode. (Refer
“Mode of Operation” feature for more details)
This feature is not supported if CDMA Module is installed in the Mobile port.
How to Send and Receive FAX using SIMADO GFXD1111S?
• Set Baud Rate (SMS + In FAX + Data) to either '0 (Autobauding)' or '19200' by using command:
232-Baud Rate-#* . (Refer “Mode of Operation” for details)
• The Fax Service for the SIM used in the SIMADO GFXD1111S must be enabled by the Service Provider.
• A PC Fax application (commonly used PC Fax applications are Bitware, WinFax and Mighty Fax) must be
installed in the PC.
• Wait for 3 minutes after power ON or restarting the system before setting the system for FAX services.
How to Program?
• Install the PC Fax application on your computer using the wizard of the PC Fax application.
• Connect COM port of the SIMADO GFXD1111S to the COM port of the computer using modem cable
(Provided with the system).
Setup the Modem
1.
Click on Start  Control Panel.